- Constant voltage pulse width modulation (PWM) charging
- Epoxy encapsulated electronics ensure durability and longevity
- Includes a temperature compensation sensor
- Rated Solar Current: 10A @ 12V
- Rated Load Current: 10A @ 12V
Product Description
Morningstar’s SunSaverTM is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller. —
SunSavers technology provides:
Exceptional Reliability
PWM Battery Charging
Consistent High Quality
100% solid state
Series design (not shunt)
True 0 to 100% PWM duty cycle
Setpoint accuracy to 35 mV
Rated for 25% overloads
Fully encapsulated in epoxy potting
Marine rated terminals / anodized case
Temperature compensation
Sealed / Flooded battery select
No need to derate
Parallel for 40 amps or more
Green charging / Red LVD indicators —
Mechanical Specifications:
Wire size #10 AWG (5.2 mm2) – Note: Some #10 spade connectors may not fit terminals
Anodized aluminum case
Marine rated terminals
Epoxy encapsulated
Weight is 8 oz (0.23 kg)
— Electrical Specifications:
12 Volt System
25 Volt Max PV
Rated Solar Input: 10A
Rated Load: 10A
Max array short circuit current 12.5A
25% Current Overload 5 min.
Regulation Voltage:
Sealed Battery 14.1 V 28.2 V
Flooded Battery 14.4 V 28.8 V
Temp. Comp. (mV/°C) 28 56
Self-consumption 6 to 10 mA
Operating Temp. 40 to +85ºC —
Reverse Current Protection:
The SunSaver prevents the battery from discharging through
the PV array at night. There is no need to install a blocking
diode for this purpose. — Noise:
The SunSaver circuit minimizes switching noise and filters all noise output to extremely low levels when the system
is properly grounded. If noise is present in a telecom load, it is most likely a grounding problem in the system.
 | US $46.55 End Date: Friday May-18-2012 21:06:41 PDT Buy It Now for only: US $46.55 Buy it now | Add to watch list |
